.svg)
Installation overview
Everything you need to install your Skyggo correctly and safely
Clearly structured
Our installation process is logically structured step by step, so you don’t miss anything and avoid mistakes.
Designed for efficiency
The construction is technically well thought out, allowing for a smooth installation without improvisation.
Support when you need it
You’re never on your own. With manuals, installation videos, and our installation service within reach, you can always contact us if you have questions.
What do you need for installation?
The exact requirements may vary depending on the model, but you will always need the following basics
Multiple persons
The installation is best carried out by 3 to 4 persons to ensure safe and correct operation.
Tools
Basic tools such as a drill, spirit level, ladder, tape measure and Allen keys.
Stable surface
A flat and solid surface such as concrete or stable masonry is essential.
Time and preparation
Allow sufficient time and read the installation instructions thoroughly beforehand.
Installation in broad terms
The steps below provide a general overview. Click on your model for detailed installation instructions.
%20(1).jpg)
Check delivery
Make sure all components are present and undamaged before you start.
Preparation and positioning
Lay out all components clearly and determine the exact position of the pergola.
Install the posts
Mount and position the posts, and check alignment using a spirit level and square.
Assemble the frame
Install the beams and supports, and securely anchor the structure to the ground.
Louvers and technical components
Install the louvers, motor, and any optional lighting according to the instructions.
Final check and finishing
Test the operation, finish neatly, and check that all fixings are properly secured.
Prefer professional installation?
Want to be sure everything is installed perfectly? Choose our installation service.
.jpg)
FAQ
Yes, this is possible provided you have sufficient technical knowledge, the correct tools, and at least two people to carry out the installation.
On average, installation takes about half a day. The exact duration depends on the model, experience level, and preparation.
In that case, a foundation must be prepared first. This means digging a hole for each post and pouring a concrete footing, optionally using quick-setting concrete. This ensures the pergola can be properly anchored with concrete anchors. Without a solid foundation, installation cannot begin.
Do not start the installation and contact Skyggo for support.
Yes. The pergola must always be installed on a stable and level surface.
First, consult the installation manual and assembly video in our Helpcenter.
If you can’t find an answer there, you can contact us during office hours at +32 16 43 84 48 or via support@skyggo.com. If self-installation isn’t for you, you can opt for complete peace of mind with installation by our Skyggo certified installers.
.svg)